Convert from .csv to a Vector Layer

Last updated on 2024-08-19 | Edit this page

Estimated time: 60 minutes

Overview

Questions

How can I import CSV files as vector layers in R?

Objectives

Import .csv files containing x,y coordinate locations into R as a data frame.
Convert a data frame to a spatial object.
Export a spatial object to a text file.

This episode will review how to import spatial points stored in .csv (Comma Separated Value) format into R as an sf spatial object. We will also reproject data imported from an ESRI shapefile format and export the reprojected data as an ESRI shapefile.

Let’s load our packages and data for this episode:

R

library(ggplot2)
library(dplyr)
library(sf)

R

aoi_boundary_HARV <- st_read("data/NEON-DS-Site-Layout-Files/HARV/HarClip_UTMZ18.shp")

# If you are getting an error, check your file path: 
# You might need change your file path to: 
# "data/2009586/NEON-DS-Site-Layout-Files/HARV/HarClip_UTMZ18.shp"

country_boundary_US <- st_read("data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-Boundary-Dissolved-States.shp")

# If you are getting an error, check your file path: 
# You might need change your file path to: 
# "data/2009586/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-Boundary-Dissolved-States.shp"

point_HARV <- st_read("data/NEON-DS-Site-Layout-Files/HARV/HARVtower_UTM18N.shp")

# If you are getting an error, check your file path: 
# You might need change your file path to: 
# "data/2009586/NEON-DS-Site-Layout-Files/HARV/HARVtower_UTM18N.shp"

Spatial Data in Text Format

The HARV_PlotLocations.csv file contains x, y (point) locations for study plot where NEON collects data on vegetation and other ecological metrics. We would like to:

Create a map of these plot locations.
Export the data in an ESRI shapefile format to share with our colleagues. This shapefile can be imported into most GIS software.
Create a map showing vegetation height with plot locations layered on top.

Spatial data are sometimes stored in a text file format (.txt or .csv). If the text file has an associated x and y location column, then we can convert it into an sf spatial object. The sf object allows us to store both the x,y values that represent the coordinate location of each point and the associated attribute data - or columns describing each feature in the spatial object.

We will continue using the sf package in this episode.

Import .csv

To begin let’s import a .csv file that contains plot coordinate x, y locations at the NEON Harvard Forest Field Site (HARV_PlotLocations.csv) and look at the structure of that new object:

R

plot_locations_HARV <-
  read.csv("data/NEON-DS-Site-Layout-Files/HARV/HARV_PlotLocations.csv")

# If you are getting an error, check your file path: 
# You might need change your file path to: 
# "data/2009586/NEON-DS-Site-Layout-Files/HARV/HARV_PlotLocations.csv"

str(plot_locations_HARV)

OUTPUT

'data.frame':	21 obs. of  16 variables:
 $ easting   : num  731405 731934 731754 731724 732125 ...
 $ northing  : num  4713456 4713415 4713115 4713595 4713846 ...
 $ geodeticDa: chr  "WGS84" "WGS84" "WGS84" "WGS84" ...
 $ utmZone   : chr  "18N" "18N" "18N" "18N" ...
 $ plotID    : chr  "HARV_015" "HARV_033" "HARV_034" "HARV_035" ...
 $ stateProvi: chr  "MA" "MA" "MA" "MA" ...
 $ county    : chr  "Worcester" "Worcester" "Worcester" "Worcester" ...
 $ domainName: chr  "Northeast" "Northeast" "Northeast" "Northeast" ...
 $ domainID  : chr  "D01" "D01" "D01" "D01" ...
 $ siteID    : chr  "HARV" "HARV" "HARV" "HARV" ...
 $ plotType  : chr  "distributed" "tower" "tower" "tower" ...
 $ subtype   : chr  "basePlot" "basePlot" "basePlot" "basePlot" ...
 $ plotSize  : int  1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 ...
 $ elevation : num  332 342 348 334 353 ...
 $ soilTypeOr: chr  "Inceptisols" "Inceptisols" "Inceptisols" "Histosols" ...
 $ plotdim_m : int  40 40 40 40 40 40 40 40 40 40 ...

We now have a data frame that contains 21 locations (rows) and 16 variables (attributes). Note that all of our character data was imported into R as character (text) data. Next, let’s explore the dataframe to determine whether it contains columns with coordinate values. If we are lucky, our .csv will contain columns labeled:

“X” and “Y” OR
Latitude and Longitude OR
easting and northing (UTM coordinates)

Let’s check out the column names of our dataframe.

R

names(plot_locations_HARV)

OUTPUT

 [1] "easting"    "northing"   "geodeticDa" "utmZone"    "plotID"    
 [6] "stateProvi" "county"     "domainName" "domainID"   "siteID"    
[11] "plotType"   "subtype"    "plotSize"   "elevation"  "soilTypeOr"
[16] "plotdim_m"

Identify X,Y Location Columns

Our column names include several fields that might contain spatial information. The plot_locations_HARV$easting and plot_locations_HARV$northing columns contain coordinate values. We can confirm this by looking at the first six rows of our data.

R

head(plot_locations_HARV$easting)

OUTPUT

[1] 731405.3 731934.3 731754.3 731724.3 732125.3 731634.3

R

head(plot_locations_HARV$northing)

OUTPUT

[1] 4713456 4713415 4713115 4713595 4713846 4713295

We have coordinate values in our data frame. In order to convert our data frame to an sf object, we also need to know the CRS associated with those coordinate values.

There are several ways to figure out the CRS of spatial data in text format.

We can check the file metadata in hopes that the CRS was recorded in the data.
We can explore the file itself to see if CRS information is embedded in the file header or somewhere in the data columns.

Following the easting and northing columns, there is a geodeticDa and a utmZone column. These appear to contain CRS information (datum and projection). Let’s view those next.

R

head(plot_locations_HARV$geodeticDa)

OUTPUT

[1] "WGS84" "WGS84" "WGS84" "WGS84" "WGS84" "WGS84"

R

head(plot_locations_HARV$utmZone)

OUTPUT

[1] "18N" "18N" "18N" "18N" "18N" "18N"

It is not typical to store CRS information in a column. But this particular file contains CRS information this way. The geodeticDa and utmZone columns contain the information that helps us determine the CRS:

geodeticDa: WGS84 – this is geodetic datum WGS84
utmZone: 18

In the previous episode we learned about the components of a proj4 string. We have everything we need to assign a CRS to our data frame.

To create the proj4 associated with UTM Zone 18 WGS84 we can look up the projection on the Spatial Reference website, which contains a list of CRS formats for each projection. From here, we can extract the proj4 string for UTM Zone 18N WGS84.

However, if we have other data in the UTM Zone 18N projection, it’s much easier to use the st_crs() function to extract the CRS in proj4 format from that object and assign it to our new spatial object. We’ve seen this CRS before with our Harvard Forest study site (point_HARV).

R

st_crs(point_HARV)

OUTPUT

Coordinate Reference System:
  User input: WGS 84 / UTM zone 18N 
  wkt:
PROJCRS["WGS 84 / UTM zone 18N",
    BASEGEOGCRS["WGS 84",
        DATUM["World Geodetic System 1984",
            ELLIPSOID["WGS 84",6378137,298.257223563,
                LENGTHUNIT["metre",1]]],
        PRIMEM["Greenwich",0,
            ANGLEUNIT["degree",0.0174532925199433]],
        ID["EPSG",4326]],
    CONVERSION["UTM zone 18N",
        METHOD["Transverse Mercator",
            ID["EPSG",9807]],
        PARAMETER["Latitude of natural origin",0,
            ANGLEUNIT["Degree",0.0174532925199433],
            ID["EPSG",8801]],
        PARAMETER["Longitude of natural origin",-75,
            ANGLEUNIT["Degree",0.0174532925199433],
            ID["EPSG",8802]],
        PARAMETER["Scale factor at natural origin",0.9996,
            SCALEUNIT["unity",1],
            ID["EPSG",8805]],
        PARAMETER["False easting",500000,
            LENGTHUNIT["metre",1],
            ID["EPSG",8806]],
        PARAMETER["False northing",0,
            LENGTHUNIT["metre",1],
            ID["EPSG",8807]]],
    CS[Cartesian,2],
        AXIS["(E)",east,
            ORDER[1],
            LENGTHUNIT["metre",1]],
        AXIS["(N)",north,
            ORDER[2],
            LENGTHUNIT["metre",1]],
    ID["EPSG",32618]]

The output above shows that the points vector layer is in UTM zone 18N. We can thus use the CRS from that spatial object to convert our non-spatial dataframe into an sf object.

Next, let’s create a crs object that we can use to define the CRS of our sf object when we create it.

R

utm18nCRS <- st_crs(point_HARV)
utm18nCRS

OUTPUT

Coordinate Reference System:
  User input: WGS 84 / UTM zone 18N 
  wkt:
PROJCRS["WGS 84 / UTM zone 18N",
    BASEGEOGCRS["WGS 84",
        DATUM["World Geodetic System 1984",
            ELLIPSOID["WGS 84",6378137,298.257223563,
                LENGTHUNIT["metre",1]]],
        PRIMEM["Greenwich",0,
            ANGLEUNIT["degree",0.0174532925199433]],
        ID["EPSG",4326]],
    CONVERSION["UTM zone 18N",
        METHOD["Transverse Mercator",
            ID["EPSG",9807]],
        PARAMETER["Latitude of natural origin",0,
            ANGLEUNIT["Degree",0.0174532925199433],
            ID["EPSG",8801]],
        PARAMETER["Longitude of natural origin",-75,
            ANGLEUNIT["Degree",0.0174532925199433],
            ID["EPSG",8802]],
        PARAMETER["Scale factor at natural origin",0.9996,
            SCALEUNIT["unity",1],
            ID["EPSG",8805]],
        PARAMETER["False easting",500000,
            LENGTHUNIT["metre",1],
            ID["EPSG",8806]],
        PARAMETER["False northing",0,
            LENGTHUNIT["metre",1],
            ID["EPSG",8807]]],
    CS[Cartesian,2],
        AXIS["(E)",east,
            ORDER[1],
            LENGTHUNIT["metre",1]],
        AXIS["(N)",north,
            ORDER[2],
            LENGTHUNIT["metre",1]],
    ID["EPSG",32618]]

R

class(utm18nCRS)

OUTPUT

[1] "crs"

.csv to sf object

Next, let’s convert our dataframe into an sf object. To do this, we need to specify:

The columns containing X (easting) and Y (northing) coordinate values
The CRS that the column coordinate represent (units are included in the CRS) - stored in our utmCRS object.

We will use the st_as_sf() function to perform the conversion.

R

plot_locations_sp_HARV <- st_as_sf(plot_locations_HARV,
                                   coords = c("easting", "northing"),
                                   crs = utm18nCRS)

We should double check the CRS to make sure it is correct and matches the CRS of point_HARV.

R

st_crs(plot_locations_sp_HARV) == st_crs(point_HARV)

OUTPUT

[1] TRUE

Plot Spatial Object

We now have a spatial R object, we can plot our newly created spatial object.

R

ggplot() +
  geom_sf(data = plot_locations_sp_HARV) +
  labs(title = "Map of Plot Locations") + 
  coord_sf()

Plot Extent

In Open and Plot Vector Layers in R we learned about spatial object extent. When we plot several spatial layers in R using ggplot, all of the layers of the plot are considered in setting the boundaries of the plot. To show this, let’s plot our country_boundary_US object.

R

ggplot() + 
  geom_sf(data = country_boundary_US) + 
  geom_sf(data = plot_locations_sp_HARV) + 
  labs(title = "Country Boundary Plot") + 
  coord_sf()

When we plot the two layers together, ggplot sets the plot boundaries so that they are large enough to include all of the data included in all of the layers. That’s really handy!

Challenge 1: Import & Plot Additional Points

We want to add two phenology plots to our existing map of vegetation plot locations.

Import the .csv: HARV/HARV_2NewPhenPlots.csv into R and do the following:

Find the X and Y coordinate locations. Which value is X and which value is Y?
These data were collected in a geographic coordinate system (WGS84). Convert the dataframe into an sf object.
Plot the new points with the plot location points from above. Be sure to add a legend. Use a different symbol for the 2 new points!

If you have extra time, feel free to add roads and other layers to your map!

Show me the solution

First we will read in the new csv file and look at the data structure.

R

newplot_locations_HARV <-
  read.csv("data/NEON-DS-Site-Layout-Files/HARV/HARV_2NewPhenPlots.csv")

# If you are getting an error, check your file path: 
# You might need change your file path to: 
# "data/2009586/NEON-DS-Site-Layout-Files/HARV/HARV_2NewPhenPlots.csv"

str(newplot_locations_HARV)

OUTPUT

'data.frame':	2 obs. of  13 variables:
 $ decimalLat: num  42.5 42.5
 $ decimalLon: num  -72.2 -72.2
 $ country   : chr  "unitedStates" "unitedStates"
 $ stateProvi: chr  "MA" "MA"
 $ county    : chr  "Worcester" "Worcester"
 $ domainName: chr  "Northeast" "Northeast"
 $ domainID  : chr  "D01" "D01"
 $ siteID    : chr  "HARV" "HARV"
 $ plotType  : chr  "tower" "tower"
 $ subtype   : chr  "phenology" "phenology"
 $ plotSize  : int  40000 40000
 $ plotDimens: chr  "200m x 200m" "200m x 200m"
 $ elevation : num  358 346

The US boundary data we worked with previously is in a geographic WGS84 CRS. We can use that data to establish a CRS for this data. First we will extract the CRS from the country_boundary_US object and confirm that it is WGS84.

R

geogCRS <- st_crs(country_boundary_US)
geogCRS

OUTPUT

Coordinate Reference System:
  User input: WGS 84 
  wkt:
GEOGCRS["WGS 84",
    DATUM["World Geodetic System 1984",
        ELLIPSOID["WGS 84",6378137,298.257223563,
            LENGTHUNIT["metre",1]]],
    PRIMEM["Greenwich",0,
        ANGLEUNIT["degree",0.0174532925199433]],
    CS[ellipsoidal,2],
        AXIS["latitude",north,
            ORDER[1],
            ANGLEUNIT["degree",0.0174532925199433]],
        AXIS["longitude",east,
            ORDER[2],
            ANGLEUNIT["degree",0.0174532925199433]],
    ID["EPSG",4326]]

Then we will convert our new data to a spatial dataframe, using the geogCRS object as our CRS.

R

newPlot.Sp.HARV <- st_as_sf(newplot_locations_HARV,
                            coords = c("decimalLon", "decimalLat"),
                            crs = geogCRS)

Next we’ll confirm that the CRS for our new object is correct.

R

st_crs(newPlot.Sp.HARV)

OUTPUT

Coordinate Reference System:
  User input: WGS 84 
  wkt:
GEOGCRS["WGS 84",
    DATUM["World Geodetic System 1984",
        ELLIPSOID["WGS 84",6378137,298.257223563,
            LENGTHUNIT["metre",1]]],
    PRIMEM["Greenwich",0,
        ANGLEUNIT["degree",0.0174532925199433]],
    CS[ellipsoidal,2],
        AXIS["latitude",north,
            ORDER[1],
            ANGLEUNIT["degree",0.0174532925199433]],
        AXIS["longitude",east,
            ORDER[2],
            ANGLEUNIT["degree",0.0174532925199433]],
    ID["EPSG",4326]]

We will be adding these new data points to the plot we created before. The data for the earlier plot was in UTM. Since we’re using ggplot, it will reproject the data for us.

Now we can create our plot.

R

ggplot() +
  geom_sf(data = plot_locations_sp_HARV, color = "orange") +
  geom_sf(data = newPlot.Sp.HARV, color = "lightblue") +
  labs(title = "Map of All Plot Locations") + 
  coord_sf()

Export to an ESRI `shapefile`

We can write an R spatial object to an ESRI shapefile using the st_write function in sf. To do this we need the following arguments:

the name of the spatial object (plot_locations_sp_HARV)
the directory where we want to save our ESRI shapefile (to use current = getwd() or you can specify a different path)
the name of the new ESRI shapefile (PlotLocations_HARV)
the driver which specifies the file format (ESRI Shapefile)

We can now export the spatial object as an ESRI shapefile.

R

st_write(obj = plot_locations_sp_HARV,
         dsn = "data/cleaned-data/PlotLocations_HARV.shp", 
         driver = "ESRI Shapefile")

Key Points

Know the projection (if any) of your point data prior to converting to a spatial object.
Convert a data frame to an sf object using the st_as_sf() function.
Export an sf object as text using the st_write() function.

Convert from .csv to a Vector Layer

Overview

Questions

Objectives

R

R

Spatial Data in Text Format

Import .csv

R

OUTPUT

R

OUTPUT

Identify X,Y Location Columns

R

OUTPUT

R

OUTPUT

R

OUTPUT

R

OUTPUT

R

OUTPUT

R

OUTPUT

R

OUTPUT

.csv to sf object

R

R

OUTPUT

Plot Spatial Object

R

Plot Extent

R

Challenge 1: Import & Plot Additional Points

Show me the solution

R

OUTPUT

R

OUTPUT

R

R

OUTPUT

R

Export to an ESRI shapefile

R

Key Points

Export to an ESRI `shapefile`